Spiral Jet Mills by the specialist in micronization.

 
 

The spiral jet mill is the most common micronizer used in pharma. The absence of mechanical moving parts within the mill, and its easy dismantling make it being the most flexible unit as multi-product plant for fine particle size reduction.

The raw material is introduced into the system through an hopper, and is fed  across a feeding unit toward the injection parts (venturi + feeding nozzle). The venturi creates a vacuum that transports the powder inside the milling chamber. The core of the process is the jet-mill, into which by using compressed gas jets the powder collides and is classified.

 
 

Lab Line


 
 
 
MC 20

MC 20

The new Jet Mill MC 20 allows micronization of small gram batches in an easy-to-use and clean table top unit.

 
 

          Jet Mill MC 44 offers a compact design. Its very easy dismounting and reassembly concept with no needs for tools allows its sterilization in autoclave...

MC 44

MC 44

 

Technical data of LABORATORY spiral jet mills

 

Type of mill
Air at 7 bar [Nm3/min.]
Feed rate [Kg/h]
Initial particle [
μm]
Final fineness [μm]
Mill dimensions
Dimensions [mm]
Weight [kg]

MC 20
0,06
0,001 min-0,5 max
500 max
0,5÷10 max
20 mm / 1/2’’
200x330x670
10

MC 44
0,3
0,01 min-0,6 max
500 max
0,5÷10 max   44 mm / 1 3/4’’
310X390X640
25

 
 

Pilot Line 


 
 

With its new layout, the integrated PILOT LINE allows interchangeable use of different jet mills MC50, MC 100 and MC 150 at any time, while the control system, the feeder or even the filtration module remain common for the three mills. This flexibility makes it the appropriated unit for quick, easy and immediate scale-up.

THE PILOT LINE RECEIVES THE MC 50, THE MC 100 OR THE MC 150 JET MILL

THE PILOT LINE RECEIVES THE MC 50, THE MC 100 OR THE MC 150 JET MILL

 

Technical data of PILOT spiral jet mills

Type of mill
Air at 7 bar [Nm3/min.]
Feed rate [Kg/h]
Initial particle [
μm]
Final fineness [μm]
Mill dimensions
Dimensions [mm]
Weight [kg]

MC 50
0,41
0,05 min-1 max
500 max
0,5÷10 max ranges               66 mm / 2 1/2’’
940X1450X1900
250

 

MC 100
0,8
0,25 min-5 max
700 max
0,5÷10 max ranges                100 mm / 4’’
940X1450X1900
250

MC 150
1,8
1 min-15 max
1500 max
0,5÷10 max ranges                 150 mm / 6’’
940X1450X1900
250

 

 

Production Line


 
PRODUCTION JET MILLS MC 300 - MC 500 - MC 600

PRODUCTION JET MILLS MC 300 - MC 500 - MC 600

 

Technical data of PRODUCTION spiral jet mils

Type of mill
Air at 7 bar [Nm3/min.]
Feed rate [Kg/h]
Initial particle [
μm]
Final fineness [μm]
Mill dimensions
Dimensions [mm]
Weight [kg]

MC 300
6,5
5 min-100 max
1000 max
0,5÷10 max ranges                300 mm / 12’’
2500X3000X4200
1100

MC 500
19
10 min-500 max
1000 max
0,5÷10 max ranges                500 mm / 20’’
2700X3000X4200
1250

MC 600
27
15 min-700 max
1000 max
0,5÷10 max ranges                600 mm / 24’’
2700X3000X4200
1400